Garden lighting in Auckland: decks, paths, security lights and outdoor power
Outdoor lighting and power need weatherproof fittings and proper RCD protection, not indoor gear pushed outside. Fittings are chosen for Auckland's coastal and wet conditions.
Outdoor and garden lighting installation in Auckland starts from around $2,000 for a deck, path or security lighting job, with larger landscape schemes quoted on the number of zones and the trenching involved. Livewire Electrical uses IP-rated, coastal-grade fittings, RCD-protected circuits and correctly sized transformers, and most standard jobs are finished in one visit.
Recent outdoor electrical jobs
Pool, garden lighting and gate work in Remuera, Huapai and Waimauku.
How an outdoor lighting job runs
How a Livewire job runs, from the first call to the paperwork.
Walk the section
We walk around the property with you, not quote from the driveway.
Design and fixed quote
Zones, fittings and low-voltage or mains are decided up front and priced as one fixed quote.
Install
Cable is run and fittings mounted. Most deck, path and security jobs are done in one visit.
Test and sign off
Every outdoor circuit is RCD protected, tested and covered by a Certificate of Compliance.
What we install outside
Deck and patio lighting, garden and path lighting, security and sensor lights, outdoor power, and feeds to sheds, sleepouts and workshops. Gate motors and pool or spa circuits too.
RCD protection on every outdoor circuit
Gates, pools, sheds and sleepouts in the same visit
Why Livewire for outdoor lighting
Outdoor lighting from around $2,000, quoted fixed after a walk around the section.
Fittings chosen for the site
Coastal-grade where salt air will get to it, so you are not replacing the lot in a few years.
Safe outdoor circuits
RCD protection and a Certificate of Compliance on every outdoor circuit.
One visit for most jobs
Standard deck, path and security lighting jobs are usually finished in one visit.
FAQs
Got questions? We've answered the most common ones here.
What maintenance do outdoor lighting systems need over time?
Outdoor fittings need periodic checks for water ingress and corrosion, especially on coastal sites, and low-voltage transformers are a common failure point after a few years of exposure. Regular checks stretch the working life of a system well past what is typical if it is simply left alone until something visibly stops working.
How long does outdoor lighting installation typically take?
A standard outdoor lighting job, whether deck, path or security lighting, is typically completed in one visit. A full landscape design with multiple zones takes longer depending on cable runs and how much digging or trenching is involved.
What safety standards apply to outdoor lighting wiring?
Outdoor wiring needs IP-rated fittings and cable suited to wet or damp locations, RCD protection on the circuit, and, for low-voltage systems, a transformer correctly sized for the total fitting load. Skipping RCD protection is a common DIY shortcut that a licensed electrician will always fix as a matter of course, not as an optional extra.
What outdoor lighting options suit NZ coastal and weather conditions?
Coastal properties need fittings rated for salt air corrosion resistance, so look for a high IP rating and marine-grade materials. Anywhere wetter benefits from strong water ingress protection regardless of how close it is to the coast. Stainless steel or marine-grade aluminium fittings noticeably outlast standard outdoor-rated fittings once they are exposed to salt air day in, day out.
What permits are needed for outdoor electrical work in NZ?
Most outdoor lighting installation does not require building consent, but any new circuit run from the switchboard still needs to be carried out by a licensed electrician and signed off with a Certificate of Compliance. Larger projects involving structural work, such as pergolas or decks with integrated lighting, may trigger separate building consent requirements worth checking with the council.
How much does outdoor lighting installation cost in NZ?
Outdoor lighting jobs with Livewire start from around $2,000. Costs vary widely by scope: a handful of deck or path lights costs considerably less than a full landscape lighting design with multiple zones and a transformer. Low-voltage garden lighting systems are generally more cost-effective to install and run than mains-voltage fittings, especially on larger properties. We talk through what you want to achieve and give you a fixed quote.
Related services
Explore other services we provide across Auckland.
Based in Kumeū, working across Auckland
Fastest response across Huapai, Riverhead, Waimauku, Whenuapai and Hobsonville. Auckland-wide for rewires, switchboards, EV chargers and commercial work.
Get a fixed quote
Tell us about the job. You get an itemised price before any work starts, and we reply within one business day.