LED lighting installation and downlight replacement in Auckland
Converting a home to LED cuts running costs and removes the fire risk of old halogen downlights sitting against insulation. Fittings and colour temperature are matched to each room, not swapped bulb for bulb.
Converting a home to LED lighting in Auckland means replacing old halogen and fluorescent fittings with LED units matched to each room, not just swapping bulbs. Cost depends on the number of fittings and whether the old downlight cans need replacing. Livewire Electrical gives a fixed quote after counting fittings, checks dimmer compatibility, and cuts running cost and fire risk in one visit.
Recent LED lighting jobs
Downlight replacements in Ponsonby and Riverhead, with fittings matched to each room.
How an LED conversion runs
How a Livewire job runs, from the first call to the paperwork.
Count the fittings
We count every fitting and check each dimmer on site.
Fixed quote
The price comes from that count, so a ceiling that needs full replacement is no surprise.
Convert room by room
Fittings and colour temperature are matched to each room, usually in one visit.
Tidy finish
Old halogens and tubes leave with us, with a Certificate of Compliance for any new circuit or switching work.
Fitting by fitting, not bulb by bulb
Old halogen downlights run hot enough to scorch insulation. LED uses a fraction of the power for the same light, runs cool and lasts many times longer.
Dimmer compatibility checked first
Insulation-rated LED units where the old cans are unsuitable
Why Livewire for your LED conversion
Registered electricians, fully insured, rated 4.9 on Google.
No second visit for flicker
Fittings that cannot take LED are replaced, not fitted with a bulb that will fail.
Right light for each room
Colour temperature and dimming are planned room by room.
Fixed price
Quoted from a fitting count, with dimmers checked before anything is ordered.
FAQs
Got questions? We've answered the most common ones here.
How do you dispose of old fluorescent tubes after an LED upgrade?
Old fluorescent tubes contain small amounts of mercury and should not go in general household rubbish. They need a specialist recycling drop-off or hazardous waste collection point. Most councils and some retailers offer fluorescent tube recycling, and Livewire arranges disposal as part of an LED upgrade so you do not have to.
What mistakes should you avoid when converting to LED?
The most common LED conversion mistakes are mixing colour temperatures between rooms, using non-dimmable LEDs on existing dimmer switches (which causes flickering), and reusing old halogen fittings not designed for LED heat and driver requirements. A licensed electrician checks dimmer compatibility and fitting suitability before installation, which avoids a second visit to fix flickering or buzzing lights afterwards.
What is the difference between warm white and cool white LED?
Warm white LED (roughly 2700K to 3000K) mimics traditional incandescent light and suits living and bedroom spaces. Cool white (4000K and above) gives a brighter, more clinical light better suited to kitchens, bathrooms and workspaces. Mixing temperatures inconsistently through a home is one of the most common LED conversion mistakes. Matching colour temperature to room function makes a noticeable difference to how a home feels.
How long do LED lights last compared to older bulb types?
Quality LED fittings typically last tens of thousands of hours, many times longer than halogen or incandescent bulbs, though actual lifespan in NZ homes depends on fitting quality and ventilation. Cheap imported LED fittings often underperform their stated lifespan, which is where sourcing through a licensed electrician rather than a bargain retail option pays off long term.
What are the main benefits of upgrading to LED lighting?
LED lighting uses significantly less electricity than halogen or incandescent bulbs for the same light output, runs cooler, and lasts many times longer, so there are far fewer replacements over the life of the home. Lower running cost is usually the main driver, but reduced heat output is a genuine safety upgrade in older homes with halogen downlights sitting close to insulation.
How much does it cost to convert a house to LED lighting in NZ?
The cost of converting a house to LED depends on the fitting count and whether existing downlights need full replacement rather than just a new bulb to properly accommodate LED. Older halogen downlight fittings often need the whole fitting changed, which affects the total more than most homeowners expect going in. Livewire quotes a fixed price after counting fittings on site.
Related services
Explore other services we provide across Auckland.
Based in Kumeū, working across Auckland
Fastest response across Huapai, Riverhead, Waimauku, Whenuapai and Hobsonville. Auckland-wide for rewires, switchboards, EV chargers and commercial work.
Get a fixed quote
Tell us about the job. You get an itemised price before any work starts, and we reply within one business day.